Procedures_Used: Flight lines were "heads up" digitized in Arc/View by UTM
zones for 3, 4, 5, 6, and the south-central & interior portion of zone 7.
The southeast portion (zones 9, 8, & part of 7) were created from a GPS file.
The A/V shapefiles were converted to A/I using the Arc command SHAPEARC.
Fuzzy tolerance for all zone files were checked and adjusted to .05 if needed.
All zones were reprojected into ALBERS using the Arc command PROJECT COVER.
All zones were then combined using the Arc command APPEND LINEFEATURES.
Edgematching across UTM zones was done in Arc/Edit by moving vertices as needed.
Made sure fuzzy tolerance was .05 then built coverage.